OBD2 GPS Car HUD Head Up Display Speedometer Oil Water Temp Monitor Slope Meter

Description

Product Description
Feature
:
1.Three modes in one: Compared with common single function instrument,our P21 sets OBD,GPS and smart slope meter in one machine,Truly achieve a machine multi-purpose,to meet needs of a veriety of scenarios
2.OBD2+GPS dual system,universal for most of cars(OBD working mode can work on most cars after the year 2008). If Your Car's OBD2 Protocol is incompatible, then you can choose GPS working system, GPS mode can work with All Cars)
3.11 kinds of interfaces,one-click switch
4.With atmosphere light,red,blue,purple,it can be switched at will;it will be on after the power on,it will flash in red when there is an alarm and it is also can be turned off if you don't want
5.Built-in electronic slope meter,it can monitoring the pitch angle and tilt angle of your car in real time,provide the infomation of car's posture change for the outdoor cross-country and extreme crossing to ensure driving safety
6.Plug & Play: Start with the car and turn off with car's engine off
7.Two installation methods:1) stand on dashboard, 2) upside down on windshield
8.Built-in GPS+Beidou and Galileo chip modules,can receive up to 32 satellites,high-precision altitude,time,latitude and longitude,compass and other informatin to meet your outdoor,off-road,self-driving needs
This product reads the driving data of the car through the OBD2 interface of the car ECU, such as vehicle speed, rotation speed, fuel consumption, water temperature and voltage, etc., Instantly read driving information under the condition that drivers’ view does not shift during the driving of the car.To keep the drivers’ eyes on road always to avoid the dangerous of lowering down head.
This product does not rewrite any data in the ECU.
Speed Alarm
: Alarm when the vehicle speed >150km/h, the setting range is 5-200 km/h
Coolant Alarm
: Alarm when the water temperature >120°C, the setting range is 50-200
RPM Alarm
: Alarm when the engine speed >6000r/min, the setting range is 1000-8000
BAT alarm
: Alarm when the voltage <10.5v, the setting range is 10.0-15.0v
Speed Adjust
: Adjust the parameter value when there is an error between the speed and the instrument panel (for example, the instrument displays 100 Km/h and the device displays 105Km/h, and the parameter value is adjusted to 102 on the dial)
Speed Offset
: When the vehicle speed does not return to 0 after the car is turned off
(If the vehicle speed shows 5Km/h, the equipment is adjusted to 6Km/h)
BAT Adjust
: When there is an error between the voltage and the instrument panel voltage, fine adjustment can be made
(If the device displays 0.2V higher than the instrument voltage, the device is adjusted to 98%)
Engine Size
: When the fuel consumption error is large, adjust according to the displacement
(If the car displacement is 3.6L, adjust the parameter value to 3.6L)
Fuel Adjust
:Fine-tuning when there is an error in fuel consumption
(If the device displays 0.2L higher than the instrument voltage, the device is adjusted to 98%)
Brightness
: Auto= Automatic light sensitivity, 1= The darkest, 8 =The brightest
Atmosphere
: RPM = Speed control color-changing atmosphere light  SPEED= Car speed control color-changing atmosphere light
OFF= Turn off the atmosphere light  BLUE= Blue atmosphere light  RED= Red atmosphere light  PURPLE=Purple atmosphere light
CWT Unit
：°C =Celsius  °F =Fahrenheit
Speed Unit
: Km/h= Kilometers MPH= Miles
Sum Distance
: Synchronization of total mileage
(For example, the total odometer on the dashboard shows that you have driven 30010km, adjust the parameter value to 30010km)
Power Off Time
: The default is 10 seconds to shut down, the adjustment range is 5-300 seconds
Sleep Voltage
: Adjust to 13.2V or 13.6 when unable to shut down, adjust to COM mode for cars that start and stop automatically
Time Adjust
: It can be adjusted to local time, the default time is China time (GMT+8)
Factory Set
: The system restores to the factory preset values. After selecting this operation, short press“M”Button to confirm
Wide Compatibility: available for cars with OBD2 and EUOBD port, plug and play;
Note: Common car models that cannot use the OBD2
:
(1).American Cars:Dodge,JEEP,SAIL,Chrysler,and other cars produced before 2008.
(2).All French((Peugeot/Citroen/Renault/Bugatti/DS/Dacia) and Italian car models（Lamborghini,Fiat,Maserati,Alfa Romeo,Ferrari,Pagani ,Faralli Mazzanti） cannot be used.
(3).Japan Cars:Suzuki,Mazda6,Infiniti(QX50,Q50,Q501),Toyota avanza 2013,Lexus(is250,ex250,es300h),Honda(Jazz,CRV),and  cars that produced before 2008.
(4).Some of South Korea's Kia and hyundai models can't be used(Hyundai Sonata 2013,Kia Soul PS 2017）.
(5).Oil-electric hybrid and diesel car, pickup truck, RV, car computer modified car.
(6).OBD I and J-OBD Car not be supported
Package Include
:
1X HUD
1X OBD Cable
1X USB Cable
1X
Bracket
1X
Sticker
1X English Manual
Location Description
In order to improve buyer's purchasing experience and let the buyer receive items as soon as possible, we currently set four warehouses in diffirent cities of United States : one in Industry, California; one in Gaithersburg, Maryland; one in Hebron, Kentucky; one in Houston, Texas. When the order is generated, we would send the item to the buyer from the nearest warehouse with sufficient inventory to the order receiving address. Hope you could get your item soon,if you have any problem,please contact us by email. Thanks for your understanding and support in advance!
Shipping
Orders will be shipped within 1 business day of receipt of cleared payment.
We do not ship on weekends and holidays.
powered by